Rear Driveshaft - 3.7L Duratec (227kW/301PS)

Removal

1. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
   

1. Refer to: Muffler and Tailpipe (309-00B Exhaust System - 3.7L Duratec (227kW/301PS), Removal and Installation).
   

1. Torque : 70 Nm

1. Torque : 35 Nm

1. NOTICE: Do not remove driveshaft from the pinion flange by pulling on the driveshaft tube. Damage to the CV-joint can result.

1. Torque : 55 Nm

Installation

1. NOTE: If a driveshaft is installed and driveshaft vibration is encountered after installation, index the driveshaft.

   To install, reverse the removal procedure.
   

Copyright © Ford Motor Company