501-05 Interior Trim and Ornamentation 2013 - 2014 MKZ
Removal and Installation Procedure revision date: 06/13/2013

B-Pillar Trim Panel

Removal

NOTE: RH side shown, LH side similar.

NOTE: Removal steps in this procedure may contain installation details.

  1. WARNING: Turn the ignition OFF and wait one minute to deplete the backup power supply. Ignition must remain OFF until repair is complete. Failure to follow this instruction may result in serious personal injury or death in the event of an accidental deployment.

    Turn the ignition off, wait at least one minute.
  1. Torque : 40 Nm
  1. Torque : 9 Nm

Installation

  1. NOTE: During installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

    To install, reverse the removal procedure.


Copyright © Ford Motor Company