307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50	2013 - 2014 MKZ
Diagnosis and Testing	Procedure revision date: 09/28/2012

Intermediate Clutch Assembly

Intermediate Clutch

For intermediate (2,6) clutch operation,
REFER to: Intermediate Clutch Assembly (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Description and Operation).

Intermediate Clutch

Condition	Possible Sources	Action
Intermediate (2,6) clutch does not apply	Solenoid body filter blocked to Shift Solenoid C (SSC)	CLEAN or INSTALL a new solenoid body filter screen. REFER to: Solenoid Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation).
	Shift Solenoid C (SSC) is mechanically stuck OFF	INSTALL a new solenoid body. REFER to: Solenoid Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, General Procedures).
	Intermediate (2,6) clutch regulator valve stuck OFF	REMOVE the main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). If bore or valve is damaged, INSTALL a new main control. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation).
	Shift Solenoid C (SSC) SIG, CB26, CB26FD/CB1234FD hydraulic circuits blocked/leaking	REMOVE the main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). CLEAN as necessary.
	CB26 supply hydraulic circuit blocked or leaking	DISASSEMBLE and INSPECT the transmission cover passages for debris/blockage. CLEAN as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
	Rear planetary sun gear and shell assembly	INSPECT the sun gear and shell for wear and damage. INSTALL new components necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
	Intermediate (2,6) clutch friction plates	DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
	Intermediate (2,6) clutch piston seal leakage	INSTALL a new intermediate (2,6) clutch piston and seals. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
Intermediate (2,6) clutch always applied	Solenoid body filter seal damaged at Shift Solenoid C (SSC)	INSTALL a new solenoid body filter screen. REFER to: Solenoid Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation).
	Shift Solenoid C (SSC) mechanically stuck ON	INSTALL a new solenoid body. REFER to: Solenoid Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, General Procedures).
	Intermediate (2,6) clutch regulator valve stuck ON	REMOVE the main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve and bias spring. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). If bore or valve is damaged, INSTALL a new main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation).
	Shift Solenoid C (SSC) SIG, CB26, CB26FD/CB1234FD hydraulic circuits blocked/leaking	REMOVE the main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). DISASSEMBLE and INSPECT the main control valve body and separator plate passages for leakage. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). CLEAN as necessary.
	Rear planetary sun gear and shell assembly	INSPECT the sun gear and shell for damage that would prevent free rotation. INSTALL new components as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
	Intermediate (2,6) clutch friction plates	DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
	Intermediate (2,6) clutch piston return spring	INSPECT the return spring for damage. INSTALL new components as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
Intermediate (2,6) clutch delayed/soft/slipping apply	Incorrect Transmission Strategy programmed into PCM	PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, General Procedures).
	Solenoid body filter seal damaged at Shift Solenoid C (SSC)	INSTALL a new solenoid body filter screen. REFER to: Solenoid Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation).
	Shift Solenoid C (SSC) mechanically sticking	INSTALL a new solenoid body. REFER to: Solenoid Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, General Procedures).
	Intermediate (2,6) clutch regulator valve sticking	REMOVE the main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). If bore or valve is damaged, INSTALL a new main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation).
	Shift Solenoid C (SSC) SIG, CB26, CB26FD/CB1234FD hydraulic circuits blocked/leaking	REMOVE the main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). DISASSEMBLE and INSPECT the main control and separator plate passages for debris/blockage. CLEAN as necessary.
	CB26 supply hydraulic circuit blocked or leaking	DISASSEMBLE and INSPECT the transmission cover passages for debris/blockage. CLEAN as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
	Intermediate (2,6) clutch friction plates	DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
	Intermediate (2,6) clutch piston seal leakage	INSTALL a new intermediate (2,6) clutch piston and seals. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
Intermediate (2,6) clutch harsh apply	Incorrect Transmission Strategy programmed into PCM	PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, General Procedures).
	Shift Solenoid C (SSC) mechanically sticking	INSTALL a new solenoid body. REFER to: Solenoid Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). PERFORM the Transmission Strategy Download, REFER to: Transmission Strategy Download (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, General Procedures).
	Intermediate (2,6) clutch regulator valve sticking	REMOVE the main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve and bias spring. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). If bore, valve or spring is damaged, INSTALL a new main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation).
	Shift Solenoid C (SSC) SIG, CB26, CB26FD/CB1234FD hydraulic circuits blocked/leaking	REMOVE the main control valve body. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. REFER to: Main Control Valve Body (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Removal and Installation). CLEAN as necessary.
	Intermediate (2,6) clutch friction plates	DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).
	Intermediate (2,6) clutch piston return spring	INSPECT the return spring for proper installation and damage. INSTALL new components as necessary. REFER to: Transmission (307-01A Automatic Transmission - Vehicles With: 6-Speed Automatic Transmission - 6F50, Disassembly).